APRILIA SX 125 Service Station Manual page 175

RX SX 125
•
Undo and remove the external screw
(3).
•
Detach the pipe clamp still attached to
the rear brake pipe from the swingarm.
•
Undo and remove the screw and re-
move the speed sensor.
•
Loosen the screw fixing the chassis on
the engine (4) to facilitate removing the
swingarm.
•
Working from the right side, fully loos-
en the ring nut (5) with the specific box-
spanner.
•
Loosen the ring nut set bushing (6).
Specific tooling
AP8101945 Fork pin ring nut
Chassis
CHAS - 175