RX SX 125
•
Place the connecting rod assembly on
the swingarm.
•
Insert the screw from the right side.
•
Fit the washer and tighten the nut (9).
•
Position the brake hoses on the swing-
arm.
•
Fasten the internal brake pipe clamp
with the screw (10).
•
Fasten the brake hose guide with the
screw (11).
•
Mount the rear wheel.
•
Assemble the chain.
•
Lower the hoist arm.
•
Release the belts from the chassis.
•
Install the fuel tank.
•
Place the speed sensor.
Drive chain
Chassis
CHAS - 179