APRILIA SX 125 Service Station Manual page 77

RX SX 125
•
Remove the clamp and disconnect the
secondary air pipe.
•
Undo and remove the screw discon-
necting the connectors of the system
ground connections.
•
Undo and remove the screw and dis-
connect the speed sensor.
CAUTION
DUE TO THE ENGINE WEIGHT, THE FOLLOWING OPERATIONS REQUIRE THE INTERVENTION
OF A SECOND OPERATOR. FIRST AGREE ABOUT THE PROCEDURE TO BE FOLLOWED.
•
Working from the right side and using
the suitable swingarm pin adjustment
tool, fully loosen the ring nut (5).
•
Loosen the ring nut set bushing (6).
Specific tooling
AP8101945 Fork pin ring nut
Engine from vehicle
ENG VE - 77