Instructions - Sirona SIROLaser Advance Operating Instructions Manual

Operation
Main home screen
There occured an error
because the user wants to
set the average power
below 0.05 W in the
chopped mode. Due to
physical limits, this is not
possible. Confirmation via
'OK'.
Internal calibration check:
1 Watt level is being
checked when finger switch
is pressed for three
seconds. Confirmation via
'OK'.
For informations of the cali-
bration check, see chapter
"Calibration check" [ ➙ 46].
54
There occured an error
because the user wants to
set the average power
below 0.3 W in the peak-
pulse mode. Due to
physical limits, this is not
possible. Confirmation via
'OK'.

Instructions

5.5.5.2
Internal calibration check:
3 Watts level is being
checked when finger switch
is pressed for three
seconds. Confirmation via
'OK'.
Operating Instructions SIROLaser Advance
Internal calibration check:
5 Watts level is being
checked when finger switch
is pressed for three
seconds. Confirmation via
'OK'.
Sirona Dental Systems GmbH
Internal calibration check:
7 Watts level is being
checked when finger switch
is pressed for three
seconds. Confirmation via
'OK'.
63 74 198 D3545
D3545.201.06.03.02 05.2014