Sirona Dental Systems Gmbh - Sirona SIROLaser Advance Operating Instructions Manual

System description
Symbols and abbreviations
λ = 970 nm ± 15nm λ
P = 14 W
max
λ λ = 635 - 650 nm
P = 1 mW
max
IEC 60825-1:2007
CAUTION
CLASS 4 VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EYE
OR SKIN EXPOSURE TO DIRECT
OR SCATTERED RADIATION
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
FINGER SWITCH
Laser Stop
Use only with power supply
Sinpro MPU 100-106
134°C
18
Interference is possible in the vicinity of the device
Laser radiation warning
Specification of laser output power and wavelength of IR and aiming
beam, see also chapter "Technical data" [ ➙ 20].
Warns of potential laser radiation hazards when opening the laser unit.
Warns of Class 4 laser radiation hazards when using the unit.
Warns of laser radiation emission at the distal tip of the handpiece.
Warns of laser radiation hazards when the fiber connector is unscrewed.
"Laser Stop" key: press this button in case of an emergency
Power supply MPU100-106
Operate the unit exclusively with the Sinpro MPU100-106 power supply
The disassembled handpiece sleeves and the fibers may be sterilized
only in autoclaves with saturated water vapor at minimum sterilization
values of 134°C (273.2°F), 3 min. holding time and 2.04 bar (29,59 psi)
overpressure.
Single use only for the bendable tip
Refers to directive 2002/96/EC and EN 50419
Do not dispose with domestic waste

Sirona Dental Systems GmbH

Operating Instructions SIROLaser Advance
63 74 198 D3545
D3545.201.06.03.02 05.2014