Paper Jam 0
WorkCentre 3210/3220 Multifunction Printer Service Manual
After a pick operation, the leading edge of the media does not reach the Feed
Sensor on time, or the Feed Sensor failed to indicated the leading edge.
Applicable Error Message
Paper Jam 0
Initial Actions
Clean the Pick Up Roller and Holder Pad.
Try feeding media from a different location.
Check the paper path for obstructions or debris.
Cycle printer power.
If the problem persists, refer to the following procedure.
Troubleshooting Reference Table
Applicable Parts
Main Controller Board, PL1.0.2
Pick Up Roller, PL4.0.26
Pick Up Solenoid, PL4.0.37
Feed Sensor, PL4.0.75
Holder Pad, PL7.0.14
Error Messages and Codes
s3210mfp-238
Wiring and Plug/Jack Map References
Map 2 - Drive Locator
Map 5 - Main Controller Board
Main Controller Board
3-9