Printer Introduction And Overview; Technical Support Information - Xerox WorkCentre 3210 Service Manual

General Information

Printer Introduction and Overview

Technical Support Information

1-2
The Xerox WorkCentre 3210/3220 Multifunction Printer has a single-pass
laser design architecture, which offers mono print speed up to 24 or 28 pages
per minute (ppm), and resolution up to 1200 x 1200 dots-per-inch (dpi) image
quality. The printer supports PostScript 3 and PCL 6 for Base and Network
configurations.
The WorkCentre 3210/3220 provides a standard 250-Sheet, input tray. The
manual feeder holds 1 sheet. The manual feeder supports specialty media,
card stock, and envelopes. The output tray holds 50 sheets facedown.
Available options add memory, media capacity, and functionality:
Memory upgrades are available to increase from 128 MB standard RAM
up to 384 MB maximum.
An Optional Tray Assembly adds 250 sheets of input storage.
The Xerox WorkCentre 3210/3220 Multifunction Printer Service Manual is the
primary document used for repairing, maintaining, and troubleshooting the
printer.
To ensure complete understanding of this product, participation in Xerox
WorkCentre 3210/3220 Service Training is strongly recommended. To service
this product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
Xerox Global Service Net: https://www.xrxgsn.com/secure/main.pl
Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
WorkCentre 3210/3220 Multifunction Printer Service Manual