Xerox WorkCentre 3210 Service Manual page 277

WorkCentre 3210/3220 Multifunction Printer Service Manual
Caution
Use care when removing the Right Cover. The Power Supply Fan and wiring
are secured to the Right Cover.
5. Pry the rear bottom of the Right Cover to release the 2 bosses on the
bottom of the printer while releasing the two locking tabs on the top side
of the Right Cover.
6. Disconnect the wiring harness connector CN11.
7. Slide the Right Cover outward at angle and remove the Right Cover.
CN11
Service Parts Disassembly
s3210mfp-088
8-63