Fuser - Xerox WorkCentre 3210 Service Manual

Theory of Operation

Fuser

Fuser Components
2-14
The Fuser consists of one Halogen Lamp, one Heat Roller, two Pressure
Rollers, one Thermistor, one Thermostat and the Exit Sensor. The Halogen
Lamp heats the Heat Roller melting the toner. The large and Small Pressure
Rollers adhere the melted toner to the media surface. The thermistor and
Thermostat monitor Fuser operating temperature.
Fuser power = 750 Watt ± 5%
Fuser
Heat Roller
Thermistor
Pressure Roller
WorkCentre 3210/3220 Multifunction Printer Service Manual
Halogen Lamp
(inside Heat Roller)
Thermostat
Pressure Roller
(behind Heat Roller)
s3210mfp-135
s3210mfp-012