Troubleshooting Print-Quality Checklist; Check The Print Cartridge; Check The Laser Unit - Xerox WorkCentre 3210 Service Manual

Print-Quality Troubleshooting

Troubleshooting Print-Quality Checklist

Check the Print Cartridge

Check the Laser Unit

5-4
As a first step to troubleshooting print quality problems, perform these checks
to isolate or correct the reported problem.
Check the amount of toner remaining. Low toner causes print-quality
problems such as fading, streaking, white lines, or dropouts. If toner is low,
remove the Print Cartridge and gently agitate the cartridge from side-to-side
to distribute toner and temporarily extend cartridge life. Replace the cartridge
if the life count is at or near end of life.
Paper, toner, and dust particles can accumulate inside the printer and cause
print-quality problems such as smearing or toner specks. One area where
accumulations of dust and debris often occur is the Laser Unit lens. Clean the
lens using a dry cotton swab or lint-free cloth.
WorkCentre 3210/3220 Multifunction Printer Service Manual
s3210mfp-015
s3210mfp-085