Event Records - GE C60 Instruction Manual

6.4 RECORDS
PATH: ACTUAL VALUES

# EVENT RECORDS

#
The Event Records menu shows the contextual data associated with up to the last 1024 events, listed in chronological
order from most recent to oldest. If all 1024 event records have been filled, the oldest record will be removed as a new
record is added. Each event record shows the event identifier/sequence number, cause, and date/time stamp associated
with the event trigger. Refer to the COMMANDS CLEAR RECORDS menu for clearing event records.
PATH: ACTUAL VALUES
# OSCILLOGRAPHY
#
6
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The
'cycles per record' value is calculated to account for the fixed amount of data storage for oscillography. See the OSCIL-
LOGRAPHY section of Chapter 5.
A trigger can be forced here at any time by setting "Yes" to the
menu for clearing the oscillography records.
CLEAR RECORDS
PATH: ACTUAL VALUES
# DATA LOGGER
#
The
OLDEST SAMPLE TIME
at which time it will start counting at the defined sampling rate. The
ples were taken. It counts up at the defined sampling rate. If Data Logger channels are defined, then both values are static.
Refer to the
COMMANDS
6-16
!" !"
RECORDS EVENT RECORDS
EVENT: XXXX
RESET OP(PUSHBUTTON)
EVENT: 3
MESSAGE
POWER ON
EVENT: 2
MESSAGE
POWER OFF
EVENT: 1
MESSAGE
EVENTS CLEARED
!" !"
RECORDS OSCILLOGRAPHY
FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
MESSAGE
0
AVAILABLE RECORDS:
MESSAGE
0
CYCLES PER RECORD:
MESSAGE
0.0
LAST CLEARED DATE:
MESSAGE
2000/07/14 015:40:16
!" !"
RECORDS DATA LOGGER
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
is the time at which the oldest available samples were taken. It will be static until the log gets full,
!" menu for clearing data logger records.
CLEAR RECORDS
C60 Breaker Management Relay
↓
Range: No, Yes
command. Refer to the
FORCE TRIGGER?
NEWEST SAMPLE TIME
6 ACTUAL VALUES
6.4.3 EVENT RECORDS
EVENT 3
DATE: 2000/07/14
EVENT 3
TIME: 14:53:00.03405
Date and Time Stamps
6.4.4 OSCILLOGRAPHY
COMMANDS
6.4.5 DATA LOGGER
is the time the most recent sam-
GE Multilin
!"