Lprint ( Outputs Data To The Printer ) - Mitsubishi QD51 Programming Manual

Logic controller
Hide thumbs Also See for QD51:
Table of Contents

Advertisement

11 INSTRUCTIONS AND FUNCTIONS
LPRINT
Instruction
• Outputs data to the printer.
LPRINT
Syntax
equation
LPRINT "ABC"
Examples
• The LPRINT instruction outputs data to the printer.
Description
• This instruction is the same as the PRINT instruction except for the fact that it outputs data
to the printer (See PRINT Instruction.)
• The output printer is specified with the ZLDV instruction.
11 - 137
LPRINT
[ <equation> [, <equation> ] ...] [;]
• • • •
• • • •
While printing is in progress, all keys will not be accepted, including the Break ,
Ctrl + C keys.
To stop printing, turn off the printer or set it to the offline status.
The printer output process will stop after approximately 5 seconds.
REMARK
See the PRINT, SPC and TAB instructions, and Section 7.3.3.
Specify the data to be output to the printer.
Outputs ABC to the printer.
MELSEC-Q
11 - 137

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad51h-s3Qd51-r24A1sd51s

Table of Contents