Mitsubishi QD51 Programming Manual page 653

Logic controller

Hide thumbs Also See for QD51:

Table of Contents

Appendix 4 Code Table

Appendix 4.1 Character Code Table

Code for the higher 4 bits (hexadecimal)

• The characters shown in a shaded box

the terminal used; see the manual for the console.

• See the manual for the terminal used for the Kanji codes.

• The following explains how to read the code table.

When checking any character code, take the value in the column and row

corresponding to the position of a character code and place the code for the

higher bits to the left and the code for the lower to the right.

"A" is 41 (hexadecimal)

This is the value expressed in hexadecimal. It is expressed in decimal as follows:

Thus, the character code for "A" is 65 (&H41).

vary according to

Ad51h-s3 Qd51-r24 A1sd51s