Mitsubishi QD51 Programming Manual page 488

11 INSTRUCTIONS AND FUNCTIONS
Processing Code 17
11 - 318
Remote RUN of the PLC CPU
Control table format definition
Element position
Format 1 Format 2
%(0) • • • • • • •
%(0)
%(1)
%(2)
%(3)
%(1) %(4)
• This code is used to run a PLC CPU on a remote station.
• Specify the following data for <control table>.
Format 1 control table
%(0) • • • • • •
%(1) • • • • • •
Format 2 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • • • • •
%(4) • • • • • •
• Specify a dummy variable or array for <storage area for data to be written>. The
analysis is carried out irrespective of the kind of variable or array used. The
variable or array specified for <storage area for data to be written> is not
changed by the execution of the operation.
Item
Station number
Control table
Network number
Station number
Detailed error code
Processing code
Specify the station number of the PLC CPU to which the
remote RUN is to be performed.
See Section 4.2.2 for the allowable specification range.
Processing code
• Specify 17.
Format 2 control table
• Specify 256.
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
Specify the station number of the PLC CPU to which the
remote RUN is to be performed.
See Section 4.2.2 for the allowable specification range.
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
Processing code
• Specify 17.
MELSEC-Q
Description
Specify the station number of the PLC.
Specify a control table of format 2.
Specify the network number.
Specify the station number of the PLC.
Detailed error codes are stored here.
Specify the processing code.
11 - 318