Mitsubishi QD51 Programming Manual page 494

11 INSTRUCTIONS AND FUNCTIONS
11 - 324
Format 3 control table
%(0) • • • • • • Format 3 control table
%(1) • • • • • • Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2) • • • • • • Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
%(3) • • • • • • Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4) • • • • • • Processing code
%(5) • • • • • • Specify the requested CPU.
%(6) • • • • • • Specify the device using the defined code.
%(7) • • • • • • Specify the device number (lower) of the device specified in
range.
%(8) • • • • • • Specify the device number (higher) of the device specified
in %(7). See Section 4.2.5 for the allowable specification
range.
%(9) • • • • • • Specify the number of device points to be written, including
the devices specified in %(6), %(7), and %(8).
The allowable specification ranges are as follows:
(a) Bit devices
(b) Word devices
• Specify 257 (&H101).
• Specify 515 (&H203).
• PLC No.1 • • • • • •992 (&H3E0)
• PLC No.2 • • • • • •993 (&H3E1)
• PLC No.3 • • • • • •994 (&H3E2)
• PLC No.4 • • • • • •995 (&H3E3)
• Control PLC • • • • • •1023 (&H3FF)
• See Section 4.2.5 for the code numbers.
%(6). See Section 4.2.5 for the allowable specification
• Q series CPU
• QnA series CPU
• Q series CPU
• QnA series CPU
MELSEC-Q
1 to 15360 points
1 to 7680 points
1 to 960 points
1 to 480 points
11 - 324