On Gosub ( Branches To Subroutine Depending On The Value Of The Specified Expression ) - Mitsubishi QD51 Programming Manual

11 INSTRUCTIONS AND FUNCTIONS
ON GOSUB
Instruction
• Branches the program execution to one of several specified line numbers depending on
the value of the specified expression.
ON <expression> GOSUB <line number>[,<line number>...]
Syntax
expression
line number
ON A GOSUB 200, 300,
Examples
400
• The ON to GOSUB instruction branches the program execution to one of several specified
Description
line numbers depending on the value of the specified expression.
• Digits after the decimal points are truncated if the value of <expression> is not an integer.
• The execution moves to the next instruction if the value of <expression> is 0 or greater
than the number of specified line numbers, which should be 255 or less.
• An "Illegal function call" error occurs if the value of <expression> is negative or greater than
255.
• A label name can be used instead of an actual line number for <line number>.
• Each of the line numbers specified in the ON to GOSUB instruction must be specified as
the corresponding starting line numbers of the processing routines.
• If an instruction is written following the ON to GOSUB instruction, the ON to GOSUB
instruction is executed when it is returned by the RETURN instruction after the execution
of the processing routine.
11 - 164
ON to GOSUB
ON A GOSUB 100 , 200 , 300 : instruction
ON GOSUB
Instruction
• • • • Branches to the specified line number depending on
the value of the expression.
• • • • Specify the line number to which the execution is
branched.
• • • • Executes the subroutine at line 200 if the value of A
is 1, the subroutine at line 300 if A is 2, and the
subroutine at line 400 if A is 3.
A=1 A=2
Line 100 Line 200
RETURN RETURN
MELSEC-Q
A=3
Line 300
RETURN
11 - 164