Table of Contents
Advertisement
11 INSTRUCTIONS AND FUNCTIONS
KEY
Instruction
• Defines a character string to a function key of the console.
KEY
Syntax
key number
character string
KEY 1, "MITSUBISHI"
Examples
• The KEY instruction defines a character string or a control character to a function key of
Description
the console.
• Specify <key number> which corresponds to the function key number on the keyboard.
• The range of the function key number is from 1 to 10.
• In <character string>, specify a character string of up to 15 characters to assign to the
specified function key. (A control character is also counted as one character.)
The first 15 characters are valid if 16 or more characters are specified.
Specify control characters using the CHR$ function.
• After the assignment is finished, pressing the function key is equivalent to entering the
character string assigned to the key from the keyboard.
• The defined character string can be displayed on the screen by the KEY LIST instruction.
• The following character string is defined to each function key:
11 - 104
KEY
<key number> , <character string>
• • • •
F1
• • • •
F2
• • • •
F3
• • • •
F4
• • • •
F5
REMARK
See the KEYLIST instruction.
• • • •
Specify a function key to define the character string.
• • • •
Specify the character string to be defined.
• • • •
Defines the character string "MITSUBISHI" to the
function key ( F1 ) of function key number 1 of the
console.
load"
F6
auto
F7
goto
F8
list
F9
run+0D
F10
H
MELSEC-Q
• • • •
save"
• • • •
key
• • • •
print
• • • •
list.+0D
+1E
H
• • • •
cont+0D
H
+1E
H
H
11 - 104
Advertisement
Table of Contents
