Mitsubishi QD51 Programming Manual page 480

11 INSTRUCTIONS AND FUNCTIONS
Processing Code 14
11 - 310
Writing parameter data
Control table format definition
Element position
Format 1 Format 2
%(0) • • • • • • •
%(0)
%(1)
%(2)
%(3)
%(1) %(4)
%(2) %(5)
%(3) %(6)
%(4) %(7)
• This code is used to write the parameters to the PLC CPU.
• Specify the following data for <control table>.
Format 1 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • •
%(4) • • • • • •
Format 2 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • • • • •
%(4) • • • • • •
%(5) • • • • • •
%(6) • • •
%(7) • • • • • •
Item
Station number
Control table
Network number
Station number
Detailed error code
Processing code
Starting address
Number of bytes
Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
Processing code
• Specify 14.
Specify the head address of the parameter area to be
written.
Specify the number of bytes to be written.
Format 2 control table
• Specify 256.
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
Processing code
• Specify 14.
Specify the head address of the parameter area to be written.
Specify the number of bytes to be written.
MELSEC-Q
Description
Specify the station number of the PLC.
Specify a control table of format 2.
Specify the network number.
Specify the station number of the PLC.
Detailed error codes are stored here.
Specify the processing code.
Specify the head address of the
parameter area to be written.
Specify the number of bytes to be written.
11 - 310