Mitsubishi QD51 Programming Manual page 396

11 INSTRUCTIONS AND FUNCTIONS
11 - 226
Format 3 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • • • • •
%(4) • • • • • •
%(5) • • • • • •
%(6) • • • • • •
• The type name of the Q series CPU is stored using the following codes in <storage
area for data read>.
CPU type name
Q2ACPU
Q2ACPU-S1
Q3ACPU
Q4ACPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
% (0) to % (7)
% (8)
% (9) to % (31)
Format 3 control table
• Specify 257 (&H101).
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
Specify the station number of the PLC CPU whose type
name is to be read.
See Section 4.2.2 for the allowable specification range.
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
Specify the requested CPU.
• PLC No.1 • • • • • •
• PLC No.2 • • • • • •
• PLC No.3 • • • • • •
• PLC No.4 • • • • • •
• Control PLC • • • • • •
Processing code
• Specify 513 (&H201).
Fixed value
• Specify 0 (&H0).
Type name string
Q2ACPU
Q2ACPU-S1
Q3ACPU
Q4ACPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Type name string
Type name code
Dummy
MELSEC-Q
992 (&H3E0)
993 (&H3E1)
994 (&H3E2)
995 (&H3E3)
1023 (&H3FF)
Type name code
&H0021
&H0022
&H0023
&H0024
&H0041
&H0041
&H0042
&H0043
&H0044
The type name string is stored
here.
The type name code is stored
here.
Dummy bytes (0) are stored here.
11 - 226