Mitsubishi QD51 Programming Manual page 395

11 INSTRUCTIONS AND FUNCTIONS
Processing Code 513
Element position
Only
Format 1
applicable
to %(0)
QD51
(-R24)
%(1)
%(2)
11 - 225
Reading the type name of the Q/QnA series PLC CPU
Control table format definition
Format 2 Format 3
%(0) %(0)
%(1) %(1)
%(2) %(2)
%(3) %(3)
%(4)
%(4) %(5)
%(5) %(6)
• It is possible to read the type name of the Q/QnA series PLC CPU using this
code.
• Specify the following data for <control table>.
Format 1 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
Format 2 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • • • • •
%(4) • • • • • •
%(5) • • • • • •
Item
Station number
Control table
Network number
Station number
Detailed error code
Requested CPU
Processing code
Fixed value
Specify the station number of the PLC CPU whose type
name is to be read.
See Section 4.2.2 for the allowable specification range.
Processing code
• Specify 513 (&H201).
Fixed value
• Specify 0 (&H0).
Format 2 control table
• Specify 256 (&H100).
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
Specify the station number of the PLC CPU whose type
name is to be read.
See Section 4.2.2 for the allowable specification range.
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
Processing code
• Specify 513 (&H201).
Fixed value
• Specify 0 (&H0).
MELSEC-Q
Description
Specify the station number of the PLC.
Specify a control table of format 2 or.3.
Specify the network number.
Specify the station number of the PLC.
Detailed error codes are stored here.
Specify the requested CPU.
Specify the processing code.
Specify 0.
11 - 225