Mitsubishi QD51 Programming Manual page 383

11 INSTRUCTIONS AND FUNCTIONS
Processing Code 13
11 - 213
Reading the type name of the PLC CPU
Control table format definition
Element position
Format 1 Format 2
%(0) • • • • • • •
%(0)
%(1)
%(2)
%(3)
%(1) %(4)
• It is possible to read the type names of PLC CPUs on MELSECNET (II),
MELSECNET/B, and MELSECNET/10 networks using this code.
• Specify the following data for <control table>.
Format 1 control table
%(0) • • • • • •
%(1) • • • • • •
Format 2 control table
%(0) • • • • • •
%(1) • • • • • •
%(2) • • • • • •
%(3) • • • • • •
%(4) • • • • • •
Item
Station number
Control table
Network number
Station number
Detailed error code
Processing code
Specify the station number of the PLC CPU from which
data is to be read.
See Section 4.2.2 for the allowable specification range.
Processing code
• Specify 13.
Format 2 control table
• Specify 256.
Specify the number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
Specify the station number of the PLC CPU from which
data is to be read.
See Section 4.2.2 for the allowable specification range.
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
Processing code
• Specify 13.
MELSEC-Q
Description
Specify the station number of the PLC.
Specify a control table of format 2.
Specify the network number.
Specify the station number of the PLC.
Detailed error codes are stored here.
Specify the processing code.
11 - 213