Mitsubishi QD51 Programming Manual page 452

11 INSTRUCTIONS AND FUNCTIONS
11 - 282
Format 2 control table
%(0) • • • • • • Format 2 control table
%(1) • • • • • • Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2) • • • • • • Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
%(3) • • • • • • Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4) • • • • • • Processing code
%(5) • • • • • • Specify the device number of the extension file registers
expressed in sequential addresses.
%(6) • • •
%(7) • • • • • • Specify the number of device points to be written, including
the device specified in %(5) and %(6).
The allowable specification range is from 1 to 64 points.
• Specify 256.
• Specify 7.
MELSEC-Q
11 - 282