Table of Contents
Advertisement
To activate manual media pull back with the Operation menu:
1
If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.
2
Press the NEXT or PREVIOUS key until the Operation menu is
displayed. Then press the SELECT key.
Pause: Operation
3
Press the NEXT or PREVIOUS key until the Pull Back menu is displayed.
Pull Back
4
Press the SELECT key. A message will be displayed to confirm Pull Back
operation.
Pull Back
5
Press the SELECT key.
The printer will begin rewinding media until the last unprinted label is
positioned just behind the media sensor.
If a Pull Back operation has been requested and a print batch has not
been sent to the printer or the media has been moved in any way (i.e.
Form Feed, Calibrate, Test Print, etc.) the following error message will be
displayed.
Pull Back Off
Media Moved / No Batch
4-32
Press SELECT
Press SELECT
SELECT to confirm
Keypad controls and menus
Advertisement
Table of Contents
Need help?
Do you have a question about the QLS-4100 and is the answer not in the manual?