QuickLabel Systems QLS-4100 Operation & Setup Manual page 52

Applicator
Ignore Host
Commands
"No Air" Warning
Image Normalization
System Configuration
Print & Peel Mode
4-8
Activates the label applicator mode. Possible
values are Enabled 1, Enabled 2, or Disabled.
Ignores all Speed, Intensity, Vertical Offset, and
Horizontal Offset commands issued by the host
computer.
Enables/disables the "No Air" warning that
appears at startup if air is not connected to the
printer.
Prevents variations in print intensity that occur
with some labels.
Enables/disables custom operating modes.
Enables/disables Print & Peel mode and
corresponding menu items. Possible values are Off,
Multiple Label, and Single Label.
See Chapter 8: Print & Peel for more information.
Keypad controls and menus