QuickLabel Systems QLS-4100 Operation & Setup Manual page 194

Windows Printer Driver Setup
The following guide explains how to configure the Windows Printer Driver
for use with the QLS-4100 Xe printer.
Accessing Device Options
1 Open the Printers and Faxes window.
(Start >> Control Panel >> Printers and Faxes)
2 Right-click the QLS-4100 Xe printer option and choose Properties. The
QLS-4100 Xe Properties window will open.
Device Options
Ribbon Ration - Check this option to enable the automatic ribbon saving
feature of the printer.
Cutter - Check this option if your printer is connected to a cutter or
cutter/stacker accessory. If this option is checked, the Cutter tab will appear
in the Printing Preferences window.
Note: If you are not using a cutter or cutter/stacker, ensure this option is not
checked or a printer error may result.
E-2 Windows printer driver setup