QuickLabel Systems QLS-4100 Operation & Setup Manual page 213

Ready State
Ready Ready: Intensity Ready: Intensity
0015 of 0050 Head 1 = 16 Head 2 = 16
Ready: Vertical
Offset = +16
Pause State
Pause Pause: Adjust Pause: Cal & Setup
Press SELECT Press SELECT
Press SELECT
Press SELECT
Calibrate
Continuous
Intensity
Head 1 = 16 Head 2 = 16
Offset = +16
Ready: Intensity Ready: Intensity Ready: Speed
Head 3 = 16 Head 4 = 16 3 in/s
1
Ready:Horizontal Ready: Display Cntr Ready:Cut Offset
Offset = -20 Off +0
Pause: Operation Pause: Ribbon
Pause: Communication
Press SELECT Press SELECT Press SELECT
Press SELECT
Press SELECT
Press SELECT
Data Port
Parallel
Ribbon Type Drop Adjust
Standard Head 1 = 22
4 5 6
Pull Back Label Reprint Synchronize Labels
Press SELECT Copies = 1 Press SELECT
Test Print Vertical Horizontal
Test Pattern: = 1 in Baseline = +0 Baseline = +0
Intensity Intensity Speed
Head 3 = 16 Head 4 = 16 3 in/s
7 8
Horizontal Cut Offset Form Stop Adjust
Offset = -20 +0 +0 (+0.0 mm)
QLS-4100 Xe Menus
Ready: Prnt Line Adj Ready: Prnt Line Adj Ready: Prnt Line Adj
Head 1 = +0 Head 2 = +0 Head 3 = +0
2 8 9
Ready: Label Reprint Ready: Form Stop Adj Ready: Peel Delay
Copies = 1 +0 (+0.0 mm) Delay = +0.0 sec
Pause: System Pause: Options
Press SELECT Press SELECT
Press SELECT
Mirror Mode Cutter
Off Enabled
Press SELECT
Standard
3
Display Cntr Memory Card Format Memory Card
Off Write Protect ON Press SELECT
10
Parallel Mode RS232 Baud Rate RS232 Handshaking
Auto 19200 Hardware
Drop Adjust Drop Adjust Drop Adjust
Head 2 = 22 Head 3 = 22 Head 4 = 22
Printer Settings Maximum Gap (mm) Cutter Baseline
Press SELECT Max Gap = 0 Offset = +0
Prnt Line Adj Prnt Line Adj Prnt Line Adj
Head 1 = +0 Head 2 = +0 Head 3 = +0
9
Peel Delay
Delay = +0.0 sec
Ready: Cross Web Adj Ready: Cross Web Adj Ready: Cross Web Adj
Head 1 = <-2 Head 2 = <-2 Head 3 = <-2
Cut Flag Pull Back Applicator
OFF Disabled Enabled 1
Off
Front Panel Lock Time Date
0000 10:42 am 2002, Sep 19
TCP/IP Address TCP/IP Subnet Mask TCP/IP Gateway
172.16.2.255 255.255.3.255 0.0.0.0
To return to the high level Pause menu, press
—
the PRINT/PAUSE key.
Ribbon Sensor To enter a sub menu, scroll to the sub menu with
—
the left/right arrow keys, then press the SELECT key.
Enabled
To change values in a sub menu, scroll values with
—
the up/down arrow keys, then press the SELECT key.
To scroll values quickly, press and hold the appropriate
—
arrow key. Values will scroll faster while keys are held.
Cross Web Adj Cross Web Adj Cross Web Adj
Head 1 = <-2 Head 2 = <-2 Head 3 = <-2
Ready: Cross Web Adj
Head 4 = <-2
Ignore Host Commands "No Air" Warning Image Normalization
Disable Disabled Disabled
Factory Reset
Press SELECT
TCP/IP Connections
Two
1 Cut Offset option appears only if Cutter is enabled.
Label Reprint option appears only if a label was
2
previously printed. (requires Windows driver)
Format Memory Card option provides a confirmation
3
menu to prevent accidental formatting.
Pull Back option available only if the Pull Back
4
function is enabled.
Label Reprint option available only if a label was
5
previously printed. (requires Window driver)
Synchronize Labels option available only when
6
using one of the following:
- External applicator system
- Print & Peel multiple label mode
7 Cut Offset option appears only if Cutter is enabled.
Form Stop Adjust option only available in Print & Peel
8
single label mode.
Peel Delay option only available in Print & Peel
9
mode (single label or multiple label).
10 Parallel Mode only available on printers with parallel port.
Cross Web Adj
Head 4 = <-2