QuickLabel Systems QLS-4100 Operation & Setup Manual page 122

Deletes all labels
SELECT to confirm
•
Displayed when the CANCEL key is pressed while a batch is being
printed. Pressing the SELECT key will cancel all pending labels in the
batch.
NVRAM Test Failed
Please reset printer
•
Displayed during the printer power-up sequence if the non-volatile
RAM test fails. Powering off the printer, and then powering it back on
may resolve the issue. If this does not resolve the issue, contact
QuickLabel Technical Support.
Detected on Head x
•
Displayed if the printhead exceeds a safe operating temperature. The
printer will automatically pause to prevent damage to the printhead.
Allow the printhead to cool for a period of time. Then press the
PRINT/PAUSE key to resume printing.
5-8
Excessive Heat
Operation