Omron E5CN-HT Communications Manual page 44

SECTION 2 CompoWay/F Communications Procedures
2-20
Command
Command content
code
0C Alarm Latch Cancel
0D SP Mode
0E Invert Direct/Reverse
Operation
12 Infrared Communication
Use
13 Hold
14 Advance
(2) Response Code
Normal Completion
Response code
0000 Normal completion
Error Occurred
Response code Error name
1001 Command too long
1002 Command too short
1100 Parameter error
2203 Operation error
Related Information
00: Alarm 1 latch cancel
01: Alarm 2 latch cancel
02: Alarm 3 latch cancel
03: HB alarm latch cancel
04: HS alarm latch cancel
05: OC alarm latch cancel
0F: All alarm latch cancel
00: Program SP Mode
01: Remote SP Mode
02: Fixed SP Mode
00: Not invert
01: Invert
00: OFF
01: ON
00: Clear hold
01: Hold
00
Name Description
No errors were found.
Cause
The command is too long.
The command is too short.
Command code and related
information are wrong.
• The Communications Writ-
ing parameter is set to "OFF"
(disabled). The command is
received regardless of the
Communications Writing
parameter setting (ON/OFF).
• Processing could not be per-
formed. For details, see (3)
Operation Commands and
Precautions below.
• Non-volatile memory error