Omron E5CN-HT Communications Manual page 103

Address
Parameter name
Four-byte Two-byte
mode mode
0A0C 2A06 MV Lower Limit (See note 1.)
0C00 2C00 Input Type (See note.)
0C02 2C01 Temperature Unit
0C12 2C09 Scaling Lower Limit
0C16 2C0B Scaling Upper Limit
0C18 2C0C Decimal Point
0C1A 2C0D Remote SP Upper Limit
0C1C 2C0E Remote SP Lower Limit
0C1E 2C0F PV Decimal Point Display
0D06 2D03 Linear Current Output
0D1E 2D0F SP Upper Limit
0D20 2D10 SP Lower Limit
Note: The input type can be selected to match the connected sensor.
Note 1: The parameter for the currently selected PID set will be accessed. For setup area 1, however, the currently selected PID
set is fixed at PID1.
5.1 Variable Area (Setting Range) List
Setting (monitor) value
Standard: H'FFFFFFCE to MV upper limit −0.1 (−5.0 to MV upper limit −0.1)
Heating/cooling: H'FFFFFBE6 to H'00000000 (−105.0 to 0.0)
Position proportional (closed):
H'FFFFFFCE to MV upper limit −0.1 (−5.0 to MV upper limit −0.1)
H'00000000 (0): Pt (−200.0 to 850.0°C/−300.0 to 1500.0°F)
H'00000001 (1): Pt (−199.9 to 500.0°C/−199.9 to 900.0°F)
H'00000002 (2): Pt (0.0 to 100.0°C/0.0 to 210.0°F)
H'00000003 (3): JPt (−199.9 to 500.0°C/−199.9 to 900.0°F)
H'00000004 (4): JPt (0.0 to 100.0°C/0.0 to 210.0°F)
H'00000005 (5): K (−200.0 to 1300.0°C/−300.0 to 2300.0°F)
H'00000006 (6): K (−20.0 to 500.0°C/0.0 to 900.0°F)
H'00000007 (7): J (−100.0 to 850.0°C/−100.0 to 1500.0°F)
H'00000008 (8): J (−20.0 to 400.0°C/0.0 to 750.0°F)
H'00000009 (9): T (−200.0 to 400.0°C/−300.0 to 700.0°F)
H'0000000A (10): T (−199.9 to 400.0°C/−199.9 to 700.0°F)
H'0000000B (11): E (−200.0 to 600.0°C/−300.0 to 1100.0°F)
H'0000000C (12): L (−100.0 to 850.0°C/−100.0 to 1500.0°F)
H'0000000D (13): U (−200.0 to 400.0°C/−300.0 to 700.0°F)
H'0000000E (14): U (−199.9 to 400.0°C/−199.9 to 700.0°F)
H'0000000F (15): N (−200.0 to 1300.0°C/−300.0 to 2300.0°F)
H'00000010 (16): R (0.0 to 1700.0°C/0.0 to 3000.0°F)
H'00000011 (17): S (0.0 to 1700.0°C/0.0 to 3000.0°F)
H'00000012 (18): B (100.0 to 1800.0°C/300.0 to 3200.0°F)
H'00000013 (19): W (0.0 to 2300.0°C/0.0 to 3200.0°F)
H'00000014 (20): PLII (0.0 to 1300.0°C/0.0 to 2300.0°F)
H'00000015 (21): K (−50.00 to 200.00°C/−50.00 to 200.00°F)
H'00000016 (22): J (−50.00 to 200.00°C/−50.00 to 200.00°F)
H'00000017 (23): T (−50.00 to 200.00°C/−50.00 to 200.00°F)
H'00000018 (24): Pt (−50.00 to 200.00°C/−50.00 to 200.00°F)
H'00000019 (25): 4 to 20mA
H'0000001A (26): 0 to 20mA
H'0000001B (27): 1 to 5V
H'0000001C (28): 0 to 5V
H'0000001D (29): 0 to 10V
H'00000000 (0): °C
H'00000001 (1): °F
H'FFFFB1E1 to Scaling upper limit −1
(−19999 to Scaling upper limit −1)
Scaling lower limit +1 to H'00007E90
(Scaling lower limit +1 to 32400)
H'00000000 to 00000003 (0 to 3)
SP lower limit to SP upper limit
SP lower limit to SP upper limit
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): 4 to 20 mA
H'00000001 (1): 0 to 20 mA
The range of values without decimal point is as follows:
Temperature: SP lower limit +1 to Input setting range upper limit
Analog: SP lower limit +1 to Scaling upper limit
The range of values without decimal point is as follows:
Temperature: Input setting range lower limit to SP upper limit −1
Analog: Scaling lower limit to SP upper limit −1
Level
Adjustment
Initial
setting
Advanced
function
setting
Initial
setting
5-7