If you do not select this, you can set the time zone, date and time, and daylight saving
Time Server (SNTP)
Tap this to set the time server.
Enter a server address.
Sets the region and time zone.
Date & Time
Sets the date and time.
Daylight Savings Time
Select this to enable daylight saving time.
Select a date format.
Use 24 Hour Clock
Select this to use 24-hour clock. To use 12-hour clock, deselect this.
Specify the time lapsed without any operation on the control panel until the machine
resets the settings automatically.
You can adjust the brightness of the touch panel between level 1 and level 7.
Select this to activate sounds. Touch an event, and use the slider bar to set the volume of
Sounds when you touch an item on a screen displayed on the control panel correctly.
Sounds when a job is completed successfully.