Dell S3840cdn User Manual page 88

EAP-Identity
Specifies the EAP identity for the first authentication.
Login Name
Specifies the login name to be used for the second authentication for EAP-Enterprise. Up
to 33 alphanumeric characters are available. The entry can be the same string as
EAP-Identity.
Password, Retype Password
Specifies the password for the login name.
USB
Enable
Select this to use USB interface.
USB Port
Select this to enable the port.
PJL
PJL (Printer Job Language) is a job control language and a PJL command is data
prepended to the top of the print jobs. Usually select this.
Print Mode
Select the printer language to use on the machine. The available options are Auto,
PostScript 3, HP-GL/2, PCL 6/5e, and TIFF/JPEG. Selecting Auto enables the machine to
automatically determine and use the most suitable language to print data received from
the host device.
Auto Job Timeout
Configure the time that the data so far received by the machine will automatically be
printed since data is no longer sent to the printer.
Adobe Communication Protocol
Standard
Select this when the output protocol of the print driver is in the ASCII format.
Binary
Select this when the output protocol of the print driver is in the BCP format.
TBCP
Select this when the output protocol of the print driver is in the TBCP format.
RAW
Select this when the output protocol of the print driver is in the ASCII or binary format.
The data is printed without being controlled by the Adobe communication protocol.
88
| Dell Printer Configuration Web Tool