Images Are Skewed; Tray 1/Optional 550-Sheet Feeder Misfeed Jam - Dell S3840cdn User Manual

Images are skewed

Action
1 Adjust the paper guides properly.
Does this solve your problem?
2 Install the transfer belt unit, the 2nd Belt Transfer Roller
(2nd BTR), and the retard roll according to an
appropriate procedure.
Does this solve your problem?

Tray 1/Optional 550-Sheet Feeder Misfeed Jam

Action
1 Ensure that Tray 1 or the optional 550-sheet feeder is
properly inserted.
Does this solve your problem?
2a Use thick paper that is 216 g/m
Does this solve your problem?
2b Use thin paper that is 60 g/m
Does this solve your problem?
2c Load coated paper one sheet at a time.
Does this solve your problem?
2d Ensure that the print media is not curled.
Does this solve your problem?
2e Is the print media damp?
3a Fan the print media.
Does this solve your problem?
3b Wipe the retard roller in Tray 1 or the optional 550-sheet
feeder with a cloth moistened with water.
Does this solve your problem?
3c Turn over the print media.
Does this solve your problem?
274
| Jam/Alignment Problems
2
or less.
2
or more.
Yes
The task is complete. Go to action 2.
The task is complete. Contact Dell.
Yes
The task is complete. Proceed to the
The task is complete. Go to action 3a.
The task is complete. Go to action 3a.
The task is complete. Go to action 3b.
The task is complete. Go to action 3a.
Go to action 3c.
The task is complete. Go to action 3b.
The task is complete. Contact Dell.
The task is complete. Go to action 4.
No
No
action
corresponding to the
type of the print
media being used:
• Thick - 2a
• Thin - 2b
• Coated - 2c
If using paper other
than the above, go
to action 2d, 2e.
Go to action 3a.