Dell S3840cdn User Manual page 188

Status Code
026-712 An error occurred while operating from Dell Printer Configuration Web Tool.
Wait for a while and try the same operation again.
026-718 The combination of the specified features such as Paper Size, Paper Tray, 2 sided printing,
and Output Tray is incompatible.
026-720 The available space of the USB memory device is not sufficient.
Confirm the amount of available space.
026-722 Initialize the USB memory device on a computer with the following file format, and then
execute the operation again.
• Supported file formats: FAT12, FAT16 (FAT), FAT32
NOTE:
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
Contact customer support if this failure is repeated.
026-726 Modify the machine configuration information in the print driver screen to match the
actual machine configuration.
026-727 • Remove unusable characters from the path name of the file location.
• Set the path in the range of 1 to 255 bytes.
026-730 Check whether the paper guides are correctly positioned in the tray, and then try again.
026-731 Correct the PIN number specified in the PJL command, and try again.
026-732 Correct the print count value specified in the PJL command, and try again.
026-733 Correct the password specified in the PJL command, and try again.
026-734 Wait more than 1 minute after user operation is completed, and then start downloading.
"027-001" - "032-999"
Status Code
027-442 Change the Self-Assigned Address 1: for IPv6 or the DHCPv6 address on the machine, or
the IP address of IPv6 on the network device, to remove the duplication of addresses.
027-443 Change the Self-Assigned Address 2: for IPv6 on the machine, or the IP address of IPv6 on
the network device, to remove the duplication of addresses.
027-444 Change the Self-Assigned Address 3: for IPv6 on the machine, or the IP address of IPv6 on
the network device, to remove the duplication of addresses.
027-445 The manually configured IPv6 address of the printer is not valid. Change the IPv6 address
of printer.
027-446 Change the Manual Address for IPv6 on the machine, or the IP address of IPv6 on the
network device, to remove the duplication of addresses.
027-447 Change the IPv6 Link-Local Address: for IPv6 on the machine, or the IP address of IPv6 on
the network device, to remove the duplication of addresses.
027-452 IPv4 address duplication on the network. Change the IPv4 address of the printer or the
device on the network.
027-701 Connect the network cable securely if the cable is disconnected.
027-720 Unable to find the server of an application interface destination.
Confirm the DNS server address. Or, check whether the computer on which the
application is installed has been registered on the DNS server.
027-721 The application does not exist.
Check whether the application is operating correctly.
027-722 The jobs timed out during connection to the application.
Try the same operation. Contact customer support if this failure is repeated.
188
| Understanding Printer Messages
Cause and Remedy
Cause and Remedy