Dell S3840cdn User Manual page 179

Status Code
017-779 Unplugged network cable is detected on the device side.
Confirm the network cable connection.
017-780 A job suspended with Print Around was automatically deleted after a certain period of
time.
Change the settings of Print Around if necessary.
017-787 Google Cloud Print error.
Use a method other than Google Cloud Print.
017-789 Check the job parameter settings, and try again. Contact customer support if this failure is
repeated.
017-790 Check the time permitted for the operation for you, and try again. Consult your system
administrator to change your authorization.
017-791
017-792 You are not permitted to print. Consult your system administrator to change your
authorization.
017-793
017-794
017-795
017-796
017-797
017-798
017-799
"018-001" - "020-999"
Status Code
018-400 IPsec setting error.
Remove the inconsistency of the IPSec settings, and enable IPSec again.
• When Preshared Key is set in IKE Authentication Method, set the passcode.
• When Digital Signature is set in IKE Authentication Method, set an IPSec certificate.
018-405 An error occurred during LDAP authentication.
The account is disabled in Active Directory of the authentication server, or the access is set
to disabled. Consult your network administrator.
018-406 The machine detected the same IP address for Ethernet 1 and Ethernet 2 on different
networks.
018-407
Set different IP addresses to Ethernet 1 and Ethernet 2. If you want to set the same IP
address, contact our Customer Support at dell.com/contactdell.
018-408 IPv4 address duplication on the network of Ethernet 2.
Change the IPv4 address of Ethernet 2.
018-409 IPv6 address duplication on the network of Ethernet 2.
Change the IPv6 address of the device in the network.
018-410 Updating of the IPv4 address and host name for the DNS server failed on the network of
Ethernet 2.
Check whether the IP address of the DNS server is set correctly.
018-411 Updating of the IPv6 address and host name for the DNS server failed on the network of
Ethernet 2.
Check whether the IP address of the DNS server is set correctly.
018-412 The IPv6 address already exists on the network of Ethernet 2.
Change the IPv6 address of the network in which the address already exists.
018-413
018-414 IP address for IPv6 set manually in Ethernet 2 is incorrect.
Set the IP address correctly.
Cause and Remedy
Cause and Remedy
Understanding Printer Messages
179
|