Dell S3840cdn User Manual page 178

Status Code
016-949 The document with a different size/orientation from the operated page was tried to be
inserted for the job with Attachment specified.
Change the settings, and try again.
"017-001" - "017-999"
Status Code
017-500 Illegal response from the Job Limit Server. Check the job parameter settings, and try again.
Contact customer support if this failure is repeated.
017-501 Consult your system administrator to change your authorization.
017-503 The number of digits of the print job password exceeded the maximum limit. Use the
smaller number of digits for your print job password and try the same operation.
017-504 Connection to the Job Limit server failed. Check the network status. Check if the Job Limit
server is working.
017-505
017-506 The job was canceled due to rejection by the job limit server. Consult your system
administrator.
017-507 The direct print feature is disabled on the printer. Enable the direct print feature.
017-720 Correct the value of Contact Type specified in the PJL command, and try again.
017-721 Correct the value of Geographic Region specified in the PJL command, and try again.
017-722 Try the operation when the total impressions are up to 9,999,900.
• Enable Spool for IPP on Dell Printer Configuration Web Tool of the destination
017-729
machine.
• Wait for a while and try the same operation again.
017-730 Check the following:
• The network cable is connected properly.
• The storage destination machine is powered on.
• The IPP port of the storage destination machine is enabled.
Contact customer support if this failure is repeated.
017-731 Check the following:
• The IP address of the POP server is set on the machine.
• The network cable is connected properly.
017-732 Set the print mode to online on the destination machine. Contact customer support if this
failure is repeated.
017-733 An internal error occurred when the job is sent to the destination device.
Contact customer support if this failure is repeated.
017-734 Send the print job again by using the printer driver or software that does not use IPP.
Contact customer support if this failure is repeated.
017-735 Device usage is prohibited by the user.
Contact customer support if this failure is repeated.
017-755 Software download error.
Take one of the following measures:
• Check the settings of Software Update on Dell Printer Configuration Web Tool.
• Download the software through USB.
017-759 Software update error.
Contact our Customer Support at dell.com/contactdell.
017-771 Software error. Contact customer support if this failure is repeated.
017-778 The sending queue became full, because no IP address is set or assigned.
The message sending is rejected.
178
| Understanding Printer Messages
Cause and Remedy
Cause and Remedy