Dell S3840cdn User Manual page 62

• WEP
• WPA2 Personal
• Mixed Mode Personal (AES/TKIP)
• WPA2 Enterprise
• Mixed Mode Enterprise (AES/TKIP)
NOTE:
• When Network Type is set to Ad hoc, WPA2 Personal and WPA2 Enterprise are not available.
Wi-Fi Protected Setup (WPS)
Select PBC to configure the network with WPS-PBC.
Select PIN to configure the network using PIN code assigned automatically by the
printer.
PIN
Displays a pin code.
Mode
For WPA2 Enterprise or Mixed Mode Enterprise (AES/TKIP), specifies the EAP
authentication method used for WPA Enterprise.
• PEAPv0 MS-CHAPv2
• EAP-TLS
• EAP-TTLS/CHAP
• EAP-TTLS/PAP
• EAP-TTLS/MSCHAPV2
Enter Identity, Enter User Name, Enter Password
Enter an EAP-identity, a user name, and a password respectively for authentication. The
identity can be the same string as the user name.
Wi-Fi Band
To select the Wi-Fi Band.
• Auto
• 2.4 Ghz
• 5 Ghz
Wi-Fi Direct
Wi-Fi Direct
Select this to enable the Wi-Fi Direct network.
NOTE:
• In multi-interface environment, Wi-Fi Direct becomes disabled if the address range is duplicated
with Ethernet or Wi-Fi.
Device Name:
Displays the device name.
62
| Device