Loading Envelopes In The Bypass Tray - Dell S3840cdn User Manual

5 Slide both width guides until they rest lightly against the edge of the print media
stack.
NOTE:
• Overtightening the guides may cause jams.
6 Set the paper size and paper type on the touch panel.

Loading Envelopes in the Bypass Tray

The following guidelines describe how to load envelopes.
• Use only recommended envelopes.
• Use only freshly unpackaged and undamaged envelopes
If you do not load envelopes in the bypass tray right after they have been removed
from the package, they may bulge. To avoid jams, press firmly across the whole
envelopes to flatten them as shown in the illustration before loading the envelopes in
the bypass tray.
• Use only same size envelopes for a single print job.
• The maximum height of envelopes that can be loaded in the bypass tray is
approximately 15 mm.
• When printing on envelopes, set the print media source to the bypass tray. From the
print driver, select Envelope for the paper type, and then select the correct size of the
envelope.
• Adjust the width guides accordingly after envelopes are loaded.
Loading Print Media
137
|