Dell S3840cdn User Manual page 182

Status Code
018-589 When Append a Number or Append Date & Time is set as the process to be executed in
case of a file name duplication, check the NEXTNAME.DAT file is correct.
018-590 A file or folder of the same name was detected on the server.
• Execute the operation again when other machines are not accessing the folder.
• Contact customer support if this failure is repeated.
018-595 Multiple entries containing the same smart card information were detected in the database
of the LDAP server.
Correct the temporary user entries of the LDAP server so that they do not contain the
same smart card information.
018-596 An error occurred during LDAP server authentication.
Contact customer support if this failure is repeated.
018-700 The network for Web Applications is being initialized.
Wait for a while and try the same operation again.
018-709 Network communication error
For IPv4 environment
• Check the IPv4 address of the machine.
• Confirm whether the network cable is connected correctly.
• Check the address of the DHCP server.
For IPv6 environment
• Confirm whether the global address distributed from an IPv6 router is assigned to the
IPv6 address of the machine.
• Confirm whether the network cable is connected correctly.
• Confirm whether the IPv6 router is set correctly.
018-715 There is no authentication method which supports both the machine authentication and
Kerberos server authentication.
• Set the appropriate authentication method in the Kerberos server.
• Disable the FIPS140 validation mode of the machine.
Contact customer support if this failure is repeated.
018-722 The machine cannot connect to Google Cloud Print, because of a network error.
Check that the network cable is connected properly. Also check that the environmental
settings are adequate.
018-723 The machine cannot connect to Google Cloud Print, because of a certificate error.
Check that the root CA certificate registered to the machine and the certificate verification
settings are correct.
018-724 The machine cannot connect to Google Cloud Print, because of an SSL communication
error.
Check the SSL settings.
018-725 The user password set in the Kerberos server expired.
018-726 The root (or intermediate) CA certificate on the smart card is not registered on the
machine. Register the root (or intermediate) CA certificate on the smart card to the
machine.
018-727 Check the certificate on the smart card, and then update the certificate if it is invalid or
revoked. Also, check whether the certificate is enabled in the server.
• When the root CA certificate of the KDC certificate is not registered, register the root CA
018-728
certificate.
• When the KDC certificate is revoked, update the KDC certificate of the server.
• Confirm that the address of the Kerberos server set in the machine and the address on
the KDC certificate of the server match.
018-729 The machine cannot connect to Google Cloud Print, because of a time out error.
Wait for a while and try the same operation again. If the problem still exists even after the
remedy, check that the network cable is connected properly. Also check that the
environmental settings are adequate.
182
| Understanding Printer Messages
Cause and Remedy