Dell S3840cdn User Manual page 192

Status Code
029-710 Wi-Fi error. An error occurred when the printer obtains a proxy auto-config (PAC) file. The
file was not found. Check with your network administrator to see if the URL of the PAC file
is registered in the DHCP server.
Contact customer support if this failure is repeated.
029-711 Ethernet 1 error. The proxy auto-config (PAC) file is invalid.
Ask your network administrator to see if the format is appropriate for JavaScript, and if the
file size is 64 KB or less.
Contact customer support if this failure is repeated.
029-712 Ethernet 1 error. A timeout error occurred when the printer obtains a proxy auto-config
(PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
• DNS server address configuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-713 Ethernet 1 error. A connection error occurred when the printer obtains a proxy
auto-config (PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
• DNS server address configuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-714 Ethernet 1 error. An error occurred when the printer obtains a proxy auto-config (PAC) file.
When Setup in Enable Proxy Server is set to Manual, check the location setting. When
Setup in Enable Proxy Server is set to Configuration Script, the location setting on the
DHCP server may have a problem. Consult your network administrator.
If the location setting is correct, check on the HTTP server to see if the PAC file exists.
Contact customer support if this failure is repeated.
029-715 Ethernet 1 error. The proxy auto-config (PAC) file is invalid. When Setup in Enable Proxy
Server is set to Manual, check the location setting. When Setup in Enable Proxy Server is
set to Configuration Script, the location setting on the DHCP server may have a problem.
Consult your network administrator.
Contact customer support if this failure is repeated.
029-716 Ethernet 1 error. A timeout error occurred when the printer obtains a proxy auto-config
(PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
If the failure persists, the network or the DHCP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-717 Ethernet 1 error. An error occurred when the printer obtains a proxy auto-config (PAC) file.
The file was not found. The PAC file location setting on the DHCP server may have a
problem. Consult your network administrator.
Contact customer support if this failure is repeated.
029-718 A timeout error occurred when the printer attempts to access the server for the App
Platform service. Check the network connection status. Wait for a while, and try the same
operation.
App Platform service error. The data does not exist on the server, or the printer could not
029-719
access the server. Check the settings on the server.
192
| Understanding Printer Messages
Cause and Remedy