Advanced Settings; Input Settings; Authentication Settings - Dell S3840cdn User Manual

Domain Controller
Validate
Options
Device Website Login
Method
Logout Confirmation
Select the log-out confirmation method from the following:
Log out user immediately.
Ask user for confirmation before logging out.

Advanced Settings

Input Settings

Case Sensitive User Name Select whether or not to ignore the case for log-in user name.

Authentication Settings

Log Failed Login Attempts Set the failure count to detect unauthorized access. An error is logged if
Limit Login Attempts of
System Administrator
Server Authentication
Response Timeout
• When no domain controller is registered:
Click Add or to add a domain controller. The Add Domain Controller
screen appears.
Set the new domain controller settings in the Add Domain Controller
screen.
• When any controller is registered:
The controller is displayed under Domain Controller. To edit an existing
controller, click the controller. The Edit Domain Controller screen appears.
Set the existing domain controller settings in the Edit Domain Controller
screen.
NOTE:
• Smart Card requires at least one domain controller.
Enable the following as necessary:
Validate the domain controller certificate returned by the domain controller
server against the domain controller certificate stored on the Device.
Timeout Set the time-out between 1 and 120 seconds in 1 second
increments.
SNTP Select whether or not to enable SNTP.
You can select the website login method.
NOTE:
• This item is displayed when Login Method is set to other than
Convenience.
authentication fails the number of times specified in Failed Login Attempt
Limit within a predetermined time (10 minutes).
This feature protects the settings from being changed by someone
impersonating your system administrator. If authentication for a system
administrator's ID fails more than specified times continuously, access is
denied.
You can specify a login attempt count from 1 to 10.
NOTE:
• The failure count is reset when the machine is restarted.
• To cancel the access rejection state, restart the machine by switching
off and on the power.
Set the server time-out response between 1 and 75 seconds in 1 second
increments.
Dell Printer Configuration Web Tool
105
|