Action
3
Use print media that is not damp.
Does this solve your problem?
4
Fan the print media.
Does this solve your problem?
5
Wipe the retard roller in the tray where the multi-feed
occurred with a cloth moistened with water.
Does this solve your problem?
6
Decrease the number of print media to be loaded to the
bypass tray.
Does this solve your problem?
Yes
The task is complete. Go to action 4.
The task is complete. Go to action 5.
The task is complete. Go to action 6.
The task is complete. Contact Dell.
Jam/Alignment Problems
No
277
|