Dell S3840cdn User Manual page 201

Status Code
116-747 The paper margin value is too large for the HP-GL/2 active coordinates area.
Decrease the paper margin value, and then execute the operation again.
116-748 There is no plot data in the HP-GL/2 print data.
Check the print data.
116-749 The job was cancelled because the specified font does not exist.
Install the font, or set the print driver to replace the font.
116-750 Banner sheet tray malfunction
Restore the tray to normal condition or change the Banner sheet tray.
116-751 The process has been canceled because the data storage space is full.
Delete stored data from the data storage space. If the error still is not resolved, split the file
and send the job again.
"117-001" - "117-999"
Status Code
117-312 An error occurred in the machine.
Contact Dell.
117-313 An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
117-314
repeated.
117-315
117-316
117-317 Wait until the printer restarts.
117-318
117-319 An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
117-320
repeated.
117-321
117-322
117-323
117-324
117-325
117-326
117-327
117-329
117-330
117-331
117-332
117-333
117-335
117-336
117-337
117-338
117-342
117-343 An error occurred in the machine. Contact Dell.
117-344 An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
Cause and Remedy
Cause and Remedy
Understanding Printer Messages
201
|