Connectivity - Dell S3840cdn User Manual

Connectivity

To open the screen, scroll the feature list on the Device screen and select
Connectivity.
NOTE:
• The displayed features may vary depending on your settings.
• You can scroll the feature list up and down.
• When wired and wireless connections are used at the same time, it is recommended to use different
subnets for the primary and secondary interfaces.
Either the wired or wireless connection can be designated as the primary network interface.
Only the primary network interface can use the following protocols:
IPsec, SMTP/POP, SNTP, WSD Scan
Notifications, FTP Server, WebDAV, App Platform Web Services
*: WSD stands for Web Services on Devices.
Primary Network
Displays Ethernet or Wi-Fi. You can switch between these options when using
multiple interface.
Ethernet
IPv4
Enable IPv4
Select this to enable the IPv4 mode.
Mode
Select a mode.
• DHCP
The address, subnet mask, and gateway address will automatically be set via DHCP.
• BOOTP
The address, subnet mask, and gateway address will automatically be set via BOOTP.
NOTE:
• This is displayed only when this option is configured on Dell Printer Configuration Web Tool.
• STATIC
The address, subnet mask, and gateway address will manually be set.
*
, Scan To (Email/Network/ FTP), LDAP, UPnP Discovery, Email
59
Device |