D For The Portable Non-Display Types And Mobile Segment Types - Icom IC-F3400D Operating Manual

Previous view
11
Bluetooth ® OPERATION
Resetting the installed Bluetooth

D For the Portable Non-display types and Mobile Segment types

NOTE: Before resetting, the Bluetooth
must be turned OFF. Otherwise, resetting cannot be
done.
Portable:
1. Turn OFF the transceiver.
2. Set [Selector] to any channel other than Channel
16.
3. While holding down [F1], turn ON the transceiver.
Continue holding down [F1] for about 3 seconds.
• 2 beeps sound.
• The transceiver enters the Bluetooth
4. Hold down [F3] for 1 second to reset the
Bluetooth ® unit's settings to their factory defaults.
5. Turn OFF the transceiver, then turn it ON again to
exit the Bluetooth ® Set mode.
[F1]
[F3]
® unit (Continued)
® function
® Set mode.
[VOL]
Mobile:
1. Turn OFF the transceiver.
2. While holding down [F2] and [F3], turn ON the
transceiver. Continue holding down [F2] and [F3]
for about 3 seconds.
• 2 beeps sound.
3. Hold down [F1] for 1 second to enter the Set
mode.
4. Push [F2] or [F3] to select "b0."
5. Hold down [Down] for 1 second to reset the
Bluetooth ® unit's settings to their factory defaults.
6. Hold down [F1] for 1 second to exit the Set mode.
7. Turn OFF the transceiver, then turn it ON again to
normally operate the transceiver.
F1
[F1] [F2] [F3]
11-16
[Up]
Power key
F2 F3
[Down]