D Transmitting An Mdc Status Call - Icom IC-F3400D Operating Manual

Previous view
8
MDC 1200 SYSTEM OPERATION
Transmitting a call (Continued)

D Transmitting an MDC Status call

An MDC Status call enables you to send a preset
Status message. There are 16 kinds of Status
messages.
In addition, the transceiver can send an MDC
Status Poll call that make the targeted station to
automatically transmit a Status call, depending on the
presetting.
<Key operation>
1. Push [Status] to display the Status list.
2. Push [Up] or [Down] to select a Status.
3. Hold down [PTT] to transmit an MDC Status call.
• After receiving an acknowledgement, "Success" is
displayed.
• When the transceiver does not receive an
acknowledgement, "Failed" is displayed.
• After transmitting the Status call, returns to the
Standby screen.
8-14