D Transmitting An Mdc Message Call - Icom IC-F3400D Operating Manual

Previous view
8
MDC 1200 SYSTEM OPERATION
Transmitting a call (Continued)

D Transmitting an MDC Message call

You can send a MDC Message call. There are 16
kinds of Messages.
<Key operation>
1. Push [Message] to display the Message list.
2. Push [Up] or [Down] to select a Message.
3. Hold down [PTT] to transmit an MDC Message
call.
• After receiving an acknowledgement, "Success" is
displayed.
• When the transceiver does not receive an
acknowledgement, "Failed" is displayed.
• After transmitting the Message call, returns to the
Standby screen.
8-16