Icom IC-F3400D Operating Manual page 63

Previous view
6
MENU SCREEN
Menu items (Continued)
System Beep Lv (System Beep level)
Sets the System Beep output level.
Emer Beep Lv (Emergency beep Level)
Sets the Beep output level when in the Emergency mode.
Key-touch Beep Lv (Key-touch beep Level)
Sets the Key-touch Beep output level.
Side Tone Lv (Side Tone beep Level)
Set the Side Tone Beep output level.
Opening Beep Lv (Opening beep Level)
Utility
Sets the Opening Beep output level.
Ringer Lv (Ringer beep Level)
Sets the Ringer output level.
SQL Level (Squelch Level)
Sets the squelch level.
Warning Beep Lv (Warning beep Level)
Sets the Warning Beep output level.
Announce Lv (Announce beep Level)
Sets the Beep output level for the Channel Announce function.
Battery Info (Battery Information)
Displays the battery voltage.
Comment
Displays the transceiver's comments.
Firmware Info (Firmware Information)
Information Displays the transceiver's firmware information.
Own ID
Displays the transceiver's unit ID.
RSSI/BER/MER
Displays the transceiver's RSSI (Received Signal Strength Indication) level, BER (Bit
Error Rate), and MER (Message Error Rate).
Intercom
Turns the Intercom function ON or OFF. (Mobile only)
Hanger
Turns the Hanger function ON or OFF. (Mobile only)
TX AF Monitor
Turns the TX AF Monitor function ON or OFF. (Mobile only)
SP Link (Speaker Link)
Control Head
Turns the Speaker Link function ON or OFF. (Mobile only)
Primary Mic
Selects which CONTROL HEAD's microphone to input the audio when using the Auto TX
function or PC commands. (Mobile only)
Head SP Out (Head Speaker Output)
Selects whether or not to output the audio from the CONTROL HEAD or an external
speaker. (Mobile only)
6-7
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-19
p. 6-20
p. 6-20
p. 6-20
p. 6-20
p. 6-20
p. 6-21
p. 6-21
p. 6-21
p. 6-21
p. 6-21
p. 6-21