Icom IC-F3400D Operating Manual page 151

Previous view
11
Bluetooth ® OPERATION
Pairing with a data device (Continued)
Step 4: Connecting to the data device
Push [Up] or [Down] to select the data device to
connect, then push [OK].
• Connects to the data device.
Step 5: Setting the Bluetooth
If the Serial Port Access Authorization screen as
shown below is displayed, accept it.
L The content of screen may differ, depending on the
device.
LSee the device's instruction manual for details.
(Example)
(Transceiver)
® Serial Port
(Data device)
11-10
Step 6: Connection
1. After the transceiver and the device connection
has succeeded, "✔" is displayed beside the
device's icon.
2. Hold down [Back] for 1 second to return to the
standby screen.
• While connected to a Bluetooth
displayed instead of " ."
TIP: When you turn ON the transceiver, with the
"Auto Connect" item is set to ON, the transceiver
automatically connects to the last paired device.
After connecting, " " is displayed instead of " ."
(Transceiver)
® device, " " is