Installing The Aileron Servos - Seagull Models EXTRA 330LX Assembly Manual

EXTRA 330LX
INSTALL THE AILERONS
CONTROL HORN.
Fiberglass control horn

INSTALLING THE AILERON SERVOS.

1) The ailerons have been pre-hinged
and glued to the wing panels and are
ready for flight. No other steps are neces-
sary for hinging.
4
Epoxy.
Epoxy.
Aileron control horn.
Instruction Manual.
2) Layout the servo on the wing to test fit
the installation and ensure servo lead is
the correct length.
3) Attach the extension to the servo lead
and secure with Safety Clip, safety wire,
tape or other method. Ensure the plugs
will not come apart from vibration or
light tension.
4) Fasten the pull string from the servo
hole to the male plug of the servo exten-
sion.