2.
3.
4.
5.
Epoxy
Epoxy
Ailerons control horn
6.
INSTALLING THE AILERON SERVOS
1.
Recommended Servo Spec Torque.
378 oz-in (27.3 kg-cm) @ 6.0V
467 oz-in (33.7 kg-cm) @ 7.4V
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
5